Lab Equipment Expert

Message us

Ask Our Expertise

Chlorophyll Meter LCPM-A10

Chlorophyll Meter LCPM-A10

Chlorophyll Meter LCPM-A10 is a compact and portable, microprocessor comprised unit, offers 0.0 to 99.9 SPAD and -10 to 99.9°C of measuring range. With 2 LED light sources i.e., red light (650 nm) and infrared light (940 nm), silicon semiconductor photodiode sensor, and LCD display, it provides real-time data display with 2×2 mm of measuring area. Adopted with 2-wavelength concentration difference of optical measuring methods, features testing parameters for plant’s nitrogen, chlorophyll, leaf structure, and leaf humidity. Lightweight design with rechargeable Li battery, USB interface, software program and 30 KB memory, this chlorophyll meter supports data visualization via chart or curve, data storage capacity of 999 groups, and automatic calculation of average.

Catalog

Specifications

Test parameters Nitrogen, Chlorophyll, Leaf structure, and Leaf humidity
Test range Chlorophyll: 0.0 to 99.9 SPAD
Nitrogen: 0.0 to 99.9 mg/g
Leaf humidity: 0.0 to 99.9% RH
Leaf temperature: -10 to 99.9°C
Test accuracy Chlorophyll: ± 1 SPAD
Nitrogen: ± 5%
Leaf humidity: ± 0.5%
Leaf temperature: ± 0.5°C
Measuring range 0.0 to 99.9 SPAD and -10 to 99.9°C
Measuring accuracy ± 3 SPAD, ± 0.5°C
Measuring repeatability ± 0.3 SPAD, ± 0.2°C
Measuring mode 2-wavelength concentration difference of optical methods
Measuring area 2×2 mm
Minimum measuring interval < 3 s
Sensor Silicon semiconductor photodiode sensor
Display mode 3 digits measuring value and 2 digits measuring times
Display LCD
Light source 2 LED light sources: Red light (650 nm) and Infrared light (940 nm)
Controller Microprocessor
Memory storage 999 groups
Memory 30 KB
Operating temperature -10 to 50°C
Power 4.2 V, 2000 Mah rechargeable Li-ion battery
Weight 200 gm

Features

  • A compact and portable microprocessor comprised unit
  • 0.0 to 99.9 SPAD and -10 to 99.9°C of measuring range
  • 2-wavelength concentration difference of optical measuring methods
  • 2 LED light sources: red light (650 nm) and infrared light (940 nm)
  • Silicon semiconductor photodiode sensor, for quick and non-destructive detection
  • 2×2 mm of measuring area, real-time data display for measured SPAD values
  • LCD display for 3 digits measuring value and 2 digits measuring times
  • Testing parameters for plant’s nitrogen, chlorophyll, leaf structure, and leaf humidity
  • Lightweight design with rechargeable Li battery, allow long and convenient operation
  • 30 KB memory with USB interface, for convenient data processing and storage
  • Data storage capacity of 999 groups, convenient for the management and analysis
  • Software program with online upgrade and data visualization via chart or curve
  • Automatic calculation of average, reduce operation time
  • An optimal unit to measure the relative amount of chlorophyll present in plant leaves

Applications

Chlorophyll meter is used to measure chlorophyll content of plants or greenness, leaf temperature, to increase the utilization of nitrogen fertilizer across agriculture, plant biotechnology etc.

Request A Quote for
Biosafety Cabinet Class II B2 LBS2-B21

© Copyright l All rights reserved 2023.