Lab Equipment Expert

Message us

Ask Our Expertise

Type III Water Purification System LHWP-A13

Type III Water Purification System LHWP-A13

Type III Water Purification System LHWP-A13 is a modular design which meets the needs of basic laboratory water purifier. It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s. These systems produce and reject water at the same time .Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance



Output of Pure water ≥ 40 L / hr.
Water Type Type III
Configuration Floor Standing
Process Single Pass RO system
Water intake flowrate ≥ 1- 1.5 L / min
Conductivity at 25 °C < 10 µs / cm
pH 5.0 – 7.5
Oxidizabes ≤ 0.4 mg / L
Evaporation residue ≤ 2.0 mg / L
Electrical requirements 220 V / 50 Hz
Power ≥ 200 W
Dimensions ( L x W x H ) 340 x 550 x 530 mm
Weight 30 kg


  • Advanced Single Pass reverse osmosis system for excellent water quality
  • Type III level water produced
  • Source of inlet water – Tap water
  • Floor Standing model
  • LCD display to monitor the intake of water pressure and various parameters intuitively
  • Anti-fouling RO membrane prevention programme
  • Online monitoring of water resistance
  • Ease of cleansing , disinfecting and draining waste water
  • Micro filter membrane to filter out pollutants
  • Automatic RO membrane antiscale flushing to extend the life of the RO membrane

© Copyright l All rights reserved 2023.